Outdoor Floor System® Structural Deck Platforms | Elevated Deck Supports | Stone-Tile Adhesives

PK33

Adjustable uniform slope float floor with dry-lay surface material

PK33 Package Quote

Please provide the following questions to receive a quote...

Are micro height adjusting plates required?

YES

1/16” EP41 Shim

1/32” EP44 Shim Pad

Pack

Is adhesive Weld-Tite 2-part adhesive required to bond small cut EP01 Deck Planks to full pieces?

Is adhesive Weld-Tite 2-part adhesive required to bond EP01 Deck Planks edge-to edge?

Is adhesive Weld-Tite adhesive required to bond GX01 Deck Planks edge-to edge?

Which adhesive?

GX09: tape bond

PT02: 2-part

Enter the quantity

What edges will you bond?

30”L of Deck Plank

24”W of Deck Plank

30”L and 24”W direction

What edges will you bond?

48”L perpendicular to joist only

Both 48”L and 30”W direction

Use standard Dry-Fab under pavers or upgrade to non-skid PT09? *

What is Paver L x W (inch) ? *

Include Paver Spacers?

YES

Use this spacer thickness

PT07 – (1x) 1/16”

PT08 – (1x) 3/32”

PT07 – (2x) 1/8”

Shipping Address

First Name *

Last Name *

Contact Email *

Contact Phone *

Company

Street Address *

City *

State *

Zip Code *

JOB NAME *

DELIVERY CONDITIONS :
Group 1 : *

RESIDENTIAL single family multifamily

COMMERCIAL building-business

JOBSITE active commercial construction

Group 2 : *

Lift-gate at delivery

Commercial dock

Does the Billing Address differ from Shipping Address

Billing Address

First Name

Last Name

Contact Email

Contact Phone

Company

Street Address

City

Zip Code

State

A Web URL

My email includes my web url

I have no website

My Contractor or Business License

Optional Message and Questionare

Message

What do you do?

How did you find us?

Attachments

Captcha

PK33 Details

An interlocked rooftop deck over living space constructed with traditional joist framing, sheeting or concrete and waterproofing (by other), with a shallow uniform slope in one direction to an edge drain, normally finished with heavy mud-set or thin-set but here overlaid with a structural Deck Plank, floating over the bearing surface supported by 1/2" tall support plates and micro adjustment (1/32", 1/16") without screws, fasteners or damage to waterproofing, surfaced with paver² grade concrete, stone or porcelain, dry-laid over the Deck Plank, no sand fill, and the completed assembly weighing <5 lbs/sf + paver weight¹.

Ultimate Load: Deck Plank • >10,750 lb/each (5sf)

Ultimate Load: Pedestal • >11,000 lb

¹Paver weight could be 20-30 lbs/sf

²May require professional engineering

SURFACE MATERIAL BY OTHER. SIZES SHOWN IN VIDEO DO NOT REFLECT USE SIZE. ILLUSTRATION ONLY.

Patent Pend.

PK33 Specifications

Parts:

Optional Parts:

Waterproof: yes | no

Lightweight: no

Level: no

Use Type: residential & commercial

PK33 Applications

A12: Sloping Plaza-Patio Shallow elevated platform over mixed bearing surface An on grade multi-use commercial space requiring a sloped top, finished surface and an open cavity beneath for drainage or water collection and diversion.

A13: Sloping Roof Terrace Shallow elevated platform over waterproofing A rooftop living space over a structurally supported waterproofing system with a simple uniform shallow slope in which the finished surface mirrors the slope and may require removability for easy access.

A17: On Grade Patio Backyard supported pavers over compacted soil A simple residential patio over unstable soil conditions on a compacted base or concrete slab in which the finished surface is raised to level above compound and changing slopes beneath with varied and adjustable supports.

Surfaces

S3: Porcelain Paver 2cm, 3/4” porcelain paver A high span strength, 3/4” porcelain tile material, intended for all exterior applications, of any pattern, and that is uniform in thickness and dimension ±1/32”.

S4: Hard Stone Paver 1”-2 1/2” slab uniformly gauged dense natural stone; Granite, Bluestone, Brazilian Slate A dense, thick-cut natural stone, intended for on-grade use, with very good span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S5: Soft Stone Paver 1”-2 1/2” slab uniformly gauged weak natural stone; Limestone, Sandstone A soft material, thick-cut natural stone, intended for on-grade use, with weak span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S6: Concrete Paver 1”-2 1/2” slab formed concrete stone-like finish A square or rectangle shaped, molded concrete, thick dimension, intended for on-grade use, with very good span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S7: Modular Paver Small interlocking or patterned stone or concrete A smaller pattern shaped, molded concrete, thick dimension, intended for on-grade use, with very good span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S8: Rubber Paver 1”-2 1/2” formed rubber blocks A thick formed, pattern shaped, molded rubber paver intended for exterior applications that may allow water movement through the paver body.

S11: Snap Decking Interlocking snap together decking board tiles A 12x12 or 16x16 wood tile with a backing support and interlocking connections to join all tiles for placement on a solid and stable bearing surface.

S12: Snap Tiles Interlocking snap together stone tiles A 12x12 or 16x16 porcelain or natural stone tile with a backing support and interlocking connections to join all tiles for placement on a solid and stable bearing surface.

S13: Snap Mat Interlocking snap together rubber matt tiles A rubber mat, 1/2”-3/4” thick, with interlocking connections, intended for exterior applications.

Conditions

C2: Dry Lay No bond, removable surface material over structural underlayment. The surface material has sufficient internal strength within itself to be placed on the supporting structure without concern for cracking under normal use regardless of movement.

C4: Removable Surface material and finishes must be removable access. Conditions or elements beneath the finished surface require frequent or occasional attention making it necessary to remove some or all of the surface material for access.

C6: Underlayment Surface material supported by full structural underlayment. The surface material will be placed over a structural panel that adds strength and load transfer from the surface material to the bearing members.

C14: Snow Melt Melting snow integration within elevated assembly. An access entry or winter group activity area requiring snow covered surfaces to melt free of snow and ice using an integrated snow melt system under the surface material.

Get System Packages