Outdoor Floor System® Structural Deck Platforms | Elevated Deck Supports | Stone-Tile Adhesives

PK44

Adjust to level pedestal platform in high-wind with glue-down surface material

PK44 Package Quote

Please provide the following questions to receive a quote...

Define your area

Enter Total Square Feet to be surfaced... or Enter Length and Width of each are to be surfaced.

Length (ft)

×

Width (ft)

0 SF TOTAL

SF TOTAL

Surface materials

S1 - Thin Gauge Tile

S2 - Thin Gauge Stone

S3 - Porcelain Paver

S4 - Hard Stone Paver

S5 - Soft Stone Paver

1/16” EP41 Shim

1/32” EP44 Shim Pad

Pack

Is adhesive Weld-Tite 2-part adhesive required to bond small cut EP01 Deck Planks to full pieces?

Is adhesive Weld-Tite 2-part adhesive required to bond EP01 Deck Planks edge-to edge?

Is adhesive Weld-Tite adhesive required to bond GX01 Deck Planks edge-to edge?

Which adhesive?

GX09: tape bond

PT02: 2-part

Enter the quantity

What edges will you bond?

30”L of Deck Plank

24”W of Deck Plank

30”L and 24”W direction

What edges will you bond?

48”L perpendicular to joist only

Both 48”L and 30”W direction

Your estimated pedestal quantity based on your Total Square Feet

Select one or more pedestal height range(s) (H) *

1/16” - 1/2”

1/2" - 1"

1" - 3 1/2"

3 1/2" - 30"

1/16” - 1/2” Enter estimated percentage per height

Enter estimated percentage per height

Quantity number

Enter estimated percentage per height 1/16

1/16”

Quantity number - 1/16

1/8"

1/4"

3/8"

1/2” - 1” Enter estimated percentage per height

Enter estimated percentage per height

Quantity number

Enter estimated percentage height - 1/2

1/2”

Quantity number - 1/2

5/8"

3/4"

7/8"

1” - 3 1/2” Enter estimated percentage per height

Enter estimated percentage per height

Quantity number

Enter estimated percentage height - 1

1”

Quantity number - 1

2 1/2"

3/12"

3 1/2” - 30” Enter estimated percentage per height

Enter estimated percentage per height

Quantity number

Enter estimated percentage height - 4

4”

Quantity number - 4

10"

12"

Select your slope adjustment (%) *

1/2

1 1/2

2 1/2

3 1/2

other

Enter your slope adjustment (%)

Shipping Address

First Name *

Last Name *

Contact Email *

Contact Phone *

Company

Street Address *

City *

State *

Zip Code *

JOB NAME *

DELIVERY CONDITIONS :
Group 1 : *

RESIDENTIAL single family multifamily

COMMERCIAL building-business

JOBSITE active commercial construction

Group 2 : *

Lift-gate at delivery

Commercial dock

Does the Billing Address differ from Shipping Address

Billing Address

First Name

Last Name

Contact Email

Contact Phone

Company

Street Address

City

Zip Code

State

A Web URL

My email includes my web url

I have no website

My Contractor or Business License

Optional Message and Questionare

Message

What do you do?

How did you find us?

Attachments

Captcha

PK44 Details

A high-wind² elevated interlocked rooftop deck over living space constructed with traditional joist framing, sheeting or concrete and waterproofing (by other), with compound slopes in multiple directions to internal drains or scuppers, normally finished with heavy mud-set or thin-set but here overlaid with a structural Deck Plank, pedestal¹ supported 1⁄2" to 30” to a level plane above the bearing surface, glue- bonded to waterproofing/bearing surface, without screws, fasteners or damage to waterproofing, surfaced with thin gauge stone or porcelain tile, glue-bonded³ to the structural Deck Plank, and the completed assembly weighing <15 lbs/sf.

Ultimate Load: Deck Plank • >10,750 lb/each (5sf)

Ultimate Load: Pedestal • >11,000 lb

¹Uses 3 pedestal assembly options

²EP46 HW Fastener

³Uses a trowel bond EP11 adhesive

SURFACE MATERIAL BY OTHER. SIZES SHOWN IN VIDEO DO NOT REFLECT USE SIZE. ILLUSTRATION ONLY.

Patent Pend.

PK44 Specifications

Parts:

Optional Parts:

Waterproof: yes | no

Lightweight: yes

Level: yes

Use Type: residential & commercial

PK44 Applications

A14: Level Rooftop Terrace Pedestal adjust access platform over waterproofing An elevated platform over waterproofing in which the finished surface is raised to level above compound and changing slopes beneath with varied and adjustable supports.

A15: Level Plaza-Patio Pedestal adjust access platform on grade An elevated platform over a compacted base or concrete slab in which the finished surface is raised to level above compound and changing slopes beneath with varied and adjustable supports.

A17: On Grade Patio Backyard supported pavers over compacted soil A simple residential patio over unstable soil conditions on a compacted base or concrete slab in which the finished surface is raised to level above compound and changing slopes beneath with varied and adjustable supports.

Surfaces

S1: Thin Gauge Tile 1cm, 3/8”-1/2” uniformly gauged porcelain tile A 3/8”-1/2” porcelain tile material, standard to the flooring industry, and with a surface friction suitable to the use, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S2: Thin Gauge Stone 1cm, 3/8”-1/2” uniformly gauged natural stone tile A 3/8”-1/2” natural stone tile, standard to the flooring industry, and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S3: Porcelain Paver 2cm, 3/4” porcelain paver A high span strength, 3/4” porcelain tile material, intended for all exterior applications, of any pattern, and that is uniform in thickness and dimension ±1/32”.

S4: Hard Stone Paver 1”-2 1/2” slab uniformly gauged dense natural stone; Granite, Bluestone, Brazilian Slate A dense, thick-cut natural stone, intended for on-grade use, with very good span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

S5: Soft Stone Paver 1”-2 1/2” slab uniformly gauged weak natural stone; Limestone, Sandstone A soft material, thick-cut natural stone, intended for on-grade use, with weak span strength and with a surface friction and type suitable to the use and climate conditions, of any dimension greater than 4” and of any shape or pattern, and that is uniform in thickness and dimension ±1/32”.

Conditions

C1: Glue Down Glue bond surface material to structural underlayment. The back of a thin gauge porcelain tile or natural stone is buttered with adhesive to bond the material to the supporting structure ensuring surface strength and stability but no removability.

C4: Removable Surface material and finishes must be removable access. Conditions or elements beneath the finished surface require frequent or occasional attention making it necessary to remove some or all of the surface material for access.

C6: Underlayment Surface material supported by full structural underlayment. The surface material will be placed over a structural panel that adds strength and load transfer from the surface material to the bearing members.

C7: High Wind Uplift wind or hurricane zone requires screw, glue assembly. Season or geographical wind conditions and/or physical height of the assembly above sea level along with architectural conditions, require special assembly considerations.

C8: Seismic Earthquake zone requires secure lateral stability. A seismic zone may require better fixture of assemblies to ensure maximum stability and to reduce load transfers or increases resulting from seismic lateral motion.

Get System Packages

PK44 Package Quote

Define your area

×

1/16” - 1/2” Enter estimated percentage per height

1/2” - 1” Enter estimated percentage per height

1” - 3 1/2” Enter estimated percentage per height

3 1/2” - 30” Enter estimated percentage per height

Shipping Address

Billing Address

Optional Message and Questionare

PK44 Details

PK44 Specifications

PK44 Applications

Surfaces

Conditions

Phone:

Fax:

Email:

Get System Packages

PK44 Package Quote

Define your area

×

1/16” - 1/2” Enter estimated percentage per height

1/2” - 1” Enter estimated percentage per height

1” - 3 1/2” Enter estimated percentage per height

3 1/2” - 30” Enter estimated percentage per height

Shipping Address

Billing Address

Optional Message and Questionare

PK44 Details

PK44 Specifications

PK44 Applications

Surfaces

Conditions

Phone:

Fax:

Email:

Shopping Cart

Quick Question

Contact Information

Phone:

Fax:

Email:

Quick Help

01 I’m new to this idea. Tell me more.

02 I'm back to find out more.

03 I need to get samples.

04 Help me make a System Package selection.

05 I’m ready to get a quote and order product.

06 Where are technical documents and specs

07 I’m ready to get a quote and order product.